Additional information
Drying time | |
---|---|
Consumption of the product | |
Thinner | |
Type of works | |
Containers |
Drying time | |
---|---|
Consumption of the product | |
Thinner | |
Type of works | |
Containers |
The value of the product:
Recommended uses:
Using for creating protection and decoration of the surfaces with a high level of operational load on the facade and also inside the premises. The product could be used as a finishing layer in a thermal insulation system with the using of foam polystyrene boards. Creates a uniform rough surface. You can create decorative effects using a structural roller or other tools
The mode of application:
Surface preparation:
NECESSARILY: before the product applying use Quartz adhesive primer for putty TM TRIORA, tinted in the same tone with the paint
Method of application:
Storage, transportation and disposal:
Keep out of children’s reach. In case of contact with eyes, rinse immediately with clean water. Protect from frost. Keep at dry and cool place at a temperature not lower than + 5°C and not higher than + 35°C, protected from direct sunlight.
Closed containers with residues have to be recycled municipal waste collection sites.
Максим –
Делал на стене объемный узор типа специальной небрежности. Работать несложно, краска плотно ложится на стену, не отваливается, податливая, легко делать рисунок. Краска не дешевая, но зато эффект того стоит.